Join Date: Nov 2017
Location: Quezon City, Philippines
Power Commander V w/ autotune
I've been running my bike with PCV for about a week with stock map from powercommander.com with no issue
Last night I decided to install the Auto Tune (I wasnt able to do it with the PCV because of the oem bung being 12mm so I had to order in an adapter for the wide band 18mm from auto Tune)
I installed everything correctly (supposedly). disconnected the OEM O2 sensor and installed the one from auto tune.
Plugged the PCV to the computer and configured the autotune to be activated. Target AFR I changed to 13.2 5% and up and applied it
turned on the bike and (note that no errors or what so eve is detected according the PCV software) and tried running it.
Somehow the the autotune light (on the computer screen) wont light up (this is already pass 60 sec and above 5% throttle). auto tune doesnt seem to be auto tuning.
Also the Check Engine Light Turned on.
Hope you guys have some insights on what I should do or something. Thanks!