Kawasaki Z650 banner

For those modding their clutch lever and having an issue accessing the 10 mm nut.

1308 Views 0 Replies 1 Participant Last post by  vietbub
Many of you have or will watch Tremonte's video on the short lever install may have an issue accessing the 10 mm nut located on the clutch side. The issue is that a plastic piece eliminates any possible space for your socket to access it. Quick workaround to it is to remove the plastic piece. Remove the black screws circled and the plastic piece should drop on its own but should hang.
Reinstalling it is simple, the only catch is that you have to hold in the white piece (circled).
See less See more
  • Like
Reactions: 1
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.