Kawasaki Z650 banner

1 - 7 of 7 Posts

·
Registered
Joined
·
41 Posts
Discussion Starter #1
Hey all, I don't suppose anyone here would happen to know for certain what the interior diameter for the Z's handle bars is? I bought some bar end mirrors that said they fit in 7/8" bars, but they were too small. Cheers.
 

·
Registered
Joined
·
41 Posts
Discussion Starter #3
Our bars are 22mm, which is a little smaller than 7/8". The I.D. would be between 20.5-21mm most likely.
Thanks Tremonte. That's weird that the ones I bought didn't fit... I guess that's what I get for buying a pair of mirrors for $13. haha
 

·
Registered
Joined
·
11 Posts
Hey Nate -
While I don't have the interior bar dimensions for you (it seems to be the one dimension I didn't get), I did recently replace my bar ends by having a guy custom make an adapter to mimic the boss dimensions from the stock bar ends, and supplying new bar ends that work with that adapter. If you go to Rhinomoto.com and send them an email - they can probably make you some too since they have all the dimensions now. See attached photos. They work to mount CRG bar-end mirrors.
Cheers. -C
 

Attachments

·
Registered
Joined
·
41 Posts
Discussion Starter #5
Hey Nate -
While I don't have the interior bar dimensions for you (it seems to be the one dimension I didn't get), I did recently replace my bar ends by having a guy custom make an adapter to mimic the boss dimensions from the stock bar ends, and supplying new bar ends that work with that adapter. If you go to Rhinomoto.com and send them an email - they can probably make you some too since they have all the dimensions now. See attached photos. They work to mount CRG bar-end mirrors.
Cheers. -C
Great, thank you Chris! I'll definitely contact Rhino about them!
 
1 - 7 of 7 Posts
Top