[amire]

Hey, please help me clarify these questions.

I would like to replace the stock runner lights(and also the headlight at a later stage). But, which ones should I choose?

I don't have any knowledge at all in this field.

- Should i go for the term W5W, T10 or both?
- Do I need resistors?
- Does it matter which ones I choose?

I've found these, swedish site translated to english:
https://translate.google.com/transl...w5w/sort-by/price/sort-direction/desc/show/64

Thank you

//AJ

 

[Stitch]

The bases are the same, but I believe one is longer than the other, but you'd be able to use either but go for the T10. If you order a CANBUS T10, you won't need to wire a resistor into it and it makes your life tremendously easier as it's just plug and play.

 

[amire]

The bases are the same, but I believe one is longer than the other, but you'd be able to use either but go for the T10. If you order a CANBUS T10, you won't need to wire a resistor into it and it makes your life tremendously easier as it's just plug and play.

Cool, thank you Stitch!
So, the z650 has a CAN bus system.

I will be looking for the T10 CANBUS.

 

[Tremonte]

T10 will be just fine. As long as you aren't replacing the directionals, and just the runners on each side of the headlamp inside the housing, you do not need resistors. You will only need resistors, or an LED flashing relay for directionals.