Kawasaki Z650 banner
1 - 2 of 2 Posts

· Registered
1992 ZX-7 2017 z650
97 Posts
This is pretty common; not a big deal. You need part no 11065-0957-18R.

Here's the diagram: 2017 Kawasaki Z650 ABS (ER650HHF) Swingarm | Babbitts Kawasaki Partshouse

I replaced the double-nuts holding it on with a single nylon lock-nut from the hardware store.

I've ridden without it before. I believe the torque from the axle nut is really what holds the wheel in place. Can't recommend doing that because I'm no kawi engineer, but that's what I think. A large washer and a nylon locknut can be used in the interim.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.