[hijack]

I've been running my bike with PCV for about a week with stock map from powercommander.com with no issue

Last night I decided to install the Auto Tune (I wasnt able to do it with the PCV because of the oem bung being 12mm so I had to order in an adapter for the wide band 18mm from auto Tune)

I installed everything correctly (supposedly). disconnected the OEM O2 sensor and installed the one from auto tune.

Plugged the PCV to the computer and configured the autotune to be activated. Target AFR I changed to 13.2 5% and up and applied it

turned on the bike and (note that no errors or what so eve is detected according the PCV software) and tried running it.

Somehow the the autotune light (on the computer screen) wont light up (this is already pass 60 sec and above 5% throttle). auto tune doesnt seem to be auto tuning.

Also the Check Engine Light Turned on.


Hope you guys have some insights on what I should do or something. Thanks!

 

[sakustoms]

Did you notice any differences with the PCV and the stock map? I have a Two Brothers exhaust and I bought the PCV but haven't installed it yet.

Also, when you took your tank off did any fuel leak out when you disconnected the fuel lines?

Thanks

 

[sakustoms]

I've been running my bike with PCV for about a week with stock map from powercommander.com with no issue

Last night I decided to install the Auto Tune (I wasnt able to do it with the PCV because of the oem bung being 12mm so I had to order in an adapter for the wide band 18mm from auto Tune)

I installed everything correctly (supposedly). disconnected the OEM O2 sensor and installed the one from auto tune.

Plugged the PCV to the computer and configured the autotune to be activated. Target AFR I changed to 13.2 5% and up and applied it

turned on the bike and (note that no errors or what so eve is detected according the PCV software) and tried running it.

Somehow the the autotune light (on the computer screen) wont light up (this is already pass 60 sec and above 5% throttle). auto tune doesnt seem to be auto tuning.

Also the Check Engine Light Turned on.


Hope you guys have some insights on what I should do or something. Thanks!

Did you ever get Autotune to work? I went back and forth with PC tech last night and he told me that you have to leave the factory O2 in and install an additional O2 bung to mount the wideband that comes with the Autotune, somewhere upstream of the factory one. Basically it should be within 8-10 inches from the cylinders.

 

[Carvalho Ciclismo Eduardo]

I've been running my bike with PCV for about a week with stock map from powercommander.com with no issue

Last night I decided to install the Auto Tune (I wasnt able to do it with the PCV because of the oem bung being 12mm so I had to order in an adapter for the wide band 18mm from auto Tune)

I installed everything correctly (supposedly). disconnected the OEM O2 sensor and installed the one from auto tune.

Plugged the PCV to the computer and configured the autotune to be activated. Target AFR I changed to 13.2 5% and up and applied it

turned on the bike and (note that no errors or what so eve is detected according the PCV software) and tried running it.

Somehow the the autotune light (on the computer screen) wont light up (this is already pass 60 sec and above 5% throttle). auto tune doesnt seem to be auto tuning.

Also the Check Engine Light Turned on.


Hope you guys have some insights on what I should do or something. Thanks!

did you succeed in making it work?
Tell us about it, please